No Hot Water? What to Check First
With no hot water, check the obvious first: on a gas heater, whether the pilot or burner is lit and the gas is on; on an electric heater, the breaker and the reset button. If those are fine, a part has usually failed.
Gas water heater: what to check
- Is the gas on? If other gas appliances work, the supply is fine. Check that the valve on the gas line to the heater is in line with the pipe.
- Is the pilot lit? Many heaters have a small window near the bottom. Older ones have a pilot you can relight by following the label on the tank. Newer ones have an electronic igniter and a status light that blinks a fault code.
- Does the pilot stay lit? If it goes out when you let go of the button, the thermocouple or flame sensor is usually at fault.
- Is the control knob on and the temperature set to at least "warm" or 120°F?
If you smell gas, stop. Do not relight anything. Leave the house and call the gas company from outside.
Electric water heater: what to check
- The breaker. Water heaters have a double breaker in the panel. If it has tripped, reset it once. If it trips again, leave it off.
- The reset button. It is the red button behind the upper access panel. Turn the breaker off before you take the cover off, because the terminals are live at 240 volts.
- How long has it been? After a big draw, a standard electric tank can take an hour or more to recover.
Tankless water heater: what to check
- Read the error code on the display and look it up in the manual.
- Open the tap further: tankless units need a minimum flow before they fire.
- Check that the gas, the power to the unit and the water valves underneath are all on.
- If it has not been descaled in a year or more, scale may be the cause. See tankless water heater repair.
When it is time to call
- The pilot will not stay lit, or the burner will not fire.
- The breaker or reset button trips again.
- There is water around the base. See leaking water heater.
- The heater is over ten years old and has started giving trouble.
Helpful answers
Questions people ask
Why do I suddenly have no hot water?
On a gas heater, the pilot has usually gone out or the igniter has failed. On an electric heater, the breaker or the high-limit reset has tripped, or the upper element has burned out.
Why do I have hot water in one bathroom but not another?
If one faucet is cold and the rest are fine, the problem is that fixture, usually its mixing valve or cartridge, not the water heater.
Around Frisco
Around Frisco, most homes have gas water heaters in the garage or attic. In a garage, lint and dust can clog the air intake screen on newer heaters and shut the burner down, so keep the area around the base clear.