Gas Water Heater Repair in Frisco, TX

When a gas water heater stops making hot water, the pilot has usually gone out and will not stay lit. The common causes are a worn thermocouple or flame sensor, a dirty burner or flame arrestor, or a failed gas control valve.

Illustrative photo of gloved hands working at a gas water heater burner access and control valve

Call for a price(972) 945-6903

Price guide: A thermocouple or flame sensor typically runs $150 to $325, a pilot assembly or igniter $175 to $400, and a gas control valve $300 to $650, parts and labour.

These are typical prices for the Frisco area, to help you plan. Every home is a little different, so your price is confirmed with you before any work starts.

What the visit involves

The plumber checks the gas supply and the pilot first, then the thermocouple or flame sensor, the burner and the flame arrestor screen under the tank. Most newer gas heaters are flammable-vapor-resistant (FVIR) designs with a sealed burner chamber, and a blocked air intake is a common fault, especially in garages where lint and dust build up.

If the part is on the truck, most gas repairs are done in one visit. Before replacing a gas valve on an older heater, ask what a new heater would cost: on a tank past ten years, the valve can be half the price of replacement.

Why the pilot will not stay lit

Smell gas?

If you smell gas near the water heater, do not relight it and do not switch lights or appliances on or off. Leave the house and call Atmos Energy's emergency line or 911 from outside. Once the gas company has made it safe, a plumber can find and fix the leak.

Other gas water heater problems

Helpful answers

Questions people ask

Why does my gas water heater pilot keep going out?

Usually a worn thermocouple or flame sensor, a dirty pilot, or a blocked air intake screen under the tank. On flammable-vapor-resistant heaters, lint and dust in a garage often clog that screen.

How much does it cost to fix a gas water heater?

Most gas repairs run $150 to $325 for a thermocouple or flame sensor, up to $300 to $650 for a new gas control valve, parts and labour.

Is it worth repairing an old gas water heater?

On a tank under eight years old, usually yes. Past ten years, or if the tank itself is leaking, replacement is usually the better money.

Can I relight my water heater pilot myself?

Yes, if there is no gas smell: follow the steps on the label on the heater. If the pilot will not stay lit after a couple of tries, the cause is usually a part that needs replacing.

Related

Cities we cover around Frisco

Also covered: Hackberry, Oak Point, Cross Roads, Aubrey, Parker.

Ask for a call back