Slab Leak Detection and Repair in Frisco, TX

A slab leak is a leak in a water line under the concrete foundation. Signs include a warm spot on the floor, the sound of running water with every tap off, a water meter that keeps turning, and a water bill that jumps for no reason.

Illustrative photo of a plumber using an acoustic leak detector beside a damp floor patch

Call for a price(972) 945-6903

Price guide: Leak detection typically runs $150 to $450. A spot repair through the slab runs $1,000 to $4,000, and rerouting the line through the attic or walls $1,500 to $5,000, depending on the house.

These are typical prices for the Frisco area, to help you plan. Every home is a little different, so your price is confirmed with you before any work starts.

What the visit involves

First the plumber confirms there is a leak: with every fixture off, the leak indicator on the water meter should not move. Pressure tests on the hot and cold lines show which side is leaking, then listening equipment, and sometimes thermal imaging, pinpoints the spot. The options are to break the slab at that spot and repair the pipe, or leave the old line and reroute a new one through the attic or walls. A reroute often makes sense when the pipe has already leaked more than once.

Why slab leaks are common in North Texas

Most homes around Frisco are built on concrete slabs over expansive clay. The clay swells in wet weather and shrinks in drought, and the movement stresses pipes under the slab. Hot water lines leak most often, because they also expand and contract with heat.

How to check for a slab leak yourself

  1. Turn off every faucet, appliance and the irrigation system.
  2. Find the water meter, usually in a box near the street, and look at the small leak indicator (often a triangle or a dial).
  3. If it is turning with everything off, water is going somewhere. If the hot water heater runs constantly too, the leak is likely on the hot side.

Helpful answers

Questions people ask

What are the signs of a slab leak?

A warm spot on the floor, the sound of running water with everything off, a water meter leak indicator that keeps moving, damp carpet or warped flooring, a water heater that runs constantly, and a water bill that jumps.

How much does slab leak repair cost in Frisco?

Detection typically runs $150 to $450. A spot repair through the slab runs $1,000 to $4,000, and a reroute $1,500 to $5,000.

Does homeowners insurance cover slab leaks?

Many policies cover the damage caused by a sudden leak, and sometimes the cost of reaching the pipe, but not the pipe repair itself. Check your policy and call your insurer before work starts.

Related

Cities we cover around Frisco

Also covered: Hackberry, Oak Point, Cross Roads, Aubrey, Parker.

Ask for a call back